• About us
• News
• Design
• Floats
• Hardware
• Bumpers
• Ramps
• Accessories
• Gallery
• Contact
• Home
• News
• Design
• Floats
• Hardware
• Bumpers
• Ramps
• Accessories
• Gallery
• Contact
• Home
P.O. Box 7302
36 Union Wharf
Portland, Maine 04112 USA
Toll Free 1-888-844-9666
Fax (207) 772-8471
info@customfloat.com
CFS works with several fabricators to offer a high quality, all welded marine aluminum ramp in lengths up to 60 feet. There are two basic styles: The arch ramp and the truss ramp.
SPECIAL LINE: Arch style
- Our most popular model, under production for 12 years, for residential and light commercial applications;
- 3' width, lengths to 50', 50 lbs/sq. ft. live load rating;
- Non-skid aluminum deck with integral skid strips standard. Other deck options available;
- Mid-rails can be prepped for water or electrical power as an option;
- Low-profile Teflon rollers are supplied for the float end;
- Brackets for 3/4-inch pins are supplied as standard equipment for the pier end of the ramp. Pier mounts can be found on the specialty page.
- 4' width is standard, lengths to 60';
- 75 lbs. / sp. ft. minimum live load rating. Higher ratings up to 125 lbs. /sq. ft. are available;
- Low-profile double-width Teflon rollers are standard;
- Standard decking is perforated diamond plate with integral skid strips; various other decking materials are available to meet any requirement;
- Side slides and other special features available upon request.
- These ramps are specifically designed to meet handicapped accessiblity requirements in Canada and USA, as well as OSHA standards;
- They have 42-inch security rails, additional inside handrails at 34: (1-7/8" diameter with 1-1/2" clearance), a structural mid-rail at 19", 4" pressure treated southern yellow pine toe-kicks, and aluminum decking with integral skid strips;
- Overall width is 4' 4", net inside clear width is 36" to 38" (depending on ramp length);
- Continuous hinge at pier-end is standard;
- Full-width transition plate is provided for the float end to eliminate the bottom step;
- Low profile triple-width rollers are built in at the float end;
- Designed live load is 75 lbs. / sq. ft.;
- Now available in lengths up to 60'
| 3' x 25' | 9H470H |
| 3' x 30' | 9H471H |
| 3' x 35' | 9H472H |
| 8" ramp wheel kit | 9H477 |
| Dolly ramp | 9H479H |
If an aluminum ramp does not fit your budget, a wooden ramp kit may be the way to solve your access problem.
These are available in three foot widths in 25', 30' and 35' lengths.Kit includes all hardware, fasteners and instructions. You supply wood, tools and labor. All ramp kits can be shipped by UPS. Eight inch ramp wheel kit and dolly ramp are also available.
TRUSS STYLE RAMPS All welded marine aluminum construction. These ramps are lightweight and provide a durable answer to float system access needs. These ramps use a tubular aluminum handrail truss system combined with a proprietary extruded aluminum frame to make for a strong and dependable ramp.
- Available in 3', 3'5" and 4' widths and lengths to 50'. Four-foot 5" and 5' widths available as special orders;
- Load rated at 100 lbs. / sq. ft. on ramps to 40' up to 4' wide and 60 lbs. /sq. ft. on ramps over 40' by 4' wide;
- Each ramp has 2 - 3 inch by 5-7/8: UHMW rollers at float end;
- Decking is 6: wide extruded aluminum non-skid planks;
- Pier mounts are included.
